# Copyright 2008 the V8 project authors. All rights reserved.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
[
[ALWAYS, {
# We don't parse RegExps at scanning time, so we can't fail on octal
# escapes (we need to parse to distinguish octal escapes from valid
# back-references).
'strict-octal-regexp': [SKIP],
# Modules which are only meant to be imported from by other tests, not to be
# tested standalone.
'fail/modules-skip*': [SKIP],
# Tests that need to run sequentially (e.g. due to memory consumption).
'fail/map-grow-failed': [PASS, HEAVY],
'fail/set-grow-failed': [PASS, HEAVY],
'wasm-trace-memory64*': [PASS, HEAVY],
##############################################################################
# Behavioural differences between Maglev and Turbofan when the former is used
# for OptimizeFunctionOnNextCall or as a frontend for Turboshaft.
#
# Maglev doesn't support inlining of Wasm code.
'wasm-inlining-into-js': [SKIP],
}], # ALWAYS
# Skip Liftoff tests on platforms that don't support Liftoff.
['arch != x64 and arch != ia32 and arch != arm64 and arch != arm and arch != s390x and arch != ppc64', {
'wasm-trace-memory-liftoff': [SKIP],
'wasm-trace-memory64-liftoff': [SKIP],
'wasm-trace-liftoff': [SKIP],
'wasm-trace-globals-liftoff': [SKIP],
}], # arch != x64 and arch != ia32 and arch != arm64 and arch != arm and arch != s390x
['variant == code_serializer', {
# Code serializer output is incompatible with all message tests
# because the same test is executed twice.
'*': [SKIP],
}], # variant == code_serializer
['not i18n', {
'fail/list-format*': [SKIP],
# Needs the StringPrototypeToLowerCaseIntl builtin.
'wasm-recognize-imports': [SKIP],
}], # not i18n
################################################################################
['mode == release', {
# Slow tests in release mode.
'fail/map-grow-failed': [PASS, SLOW],
'fail/set-grow-failed': [PASS, SLOW],
}],
##############################################################################
# TODO(v8:7777): Change this once wasm is supported in jitless mode.
['not has_webassembly or (variant == jitless and not has_wasm_interpreter)', {
'mjsunit/fail/assert-promise-result-wasm-compile-fail': [SKIP],
'mjsunit/fail/assert-in-promise-fail-recursive': [FAIL],
'fail/wasm-*': [SKIP],
'wasm-*': [SKIP],
}], # not has_webassembly or (variant == jitless and not has_wasm_interpreter)
##############################################################################
['has_wasm_interpreter and variant == jitless', {
# Skip tests that require Wasm experimental features not supported by the
# Wasm interpreter, or that explicitly require compilation.
'wasm-debug-trace-minimal': [SKIP],
# Tests that require compilation
'fail/wasm-async-compile-fail': [SKIP],
'js-wasm-wrapper-inlining-turbolev*': [SKIP],
'wasm-compilation-hints-inlining-no-liftoff': [SKIP],
'wasm-speculative-inlining': [SKIP],
'wasm-trace-globals': [SKIP],
'wasm-trace-turbofan': [SKIP],
# --trace-wasm-memory
'wasm-trace-memory64': [SKIP],
'wasm-trace-memory': [SKIP], # also --wasm-memory64
# Different error message
'fail/wasm-async-instantiate-fail': [SKIP],
# Tests using %WasmTierUpFunction()
'wasm-trace-deopt-64': [SKIP],
}], # has_webassembly and variant == jitless
################################################################################
['variant == stress_snapshot', {
'*': [SKIP], # only relevant for mjsunit tests.
}],
################################################################################
['arch == mips64el or arch == riscv64 or arch == loong64', {
# Tests that require Simd enabled.
'wasm-trace-memory': [SKIP],
'wasm-trace-memory64': [SKIP],
}], # arch == mips64el or arch == riscv64 or arch == loong64
##############################################################################
['no_simd_hardware == True', {
'wasm-trace-memory': [SKIP],
'wasm-trace-memory-liftoff': [SKIP],
'wasm-trace-memory64': [SKIP],
'wasm-trace-memory64-liftoff': [SKIP],
'wasm-trace-globals': [SKIP],
'wasm-trace-globals-liftoff': [SKIP],
}], # no_simd_hardware == True
##############################################################################
['not (arch == x64 and mode == release)', {
# Only run these known slow tests on bots that we think to be reasonably
# fast.
'fail/map-grow-failed': [SKIP],
'fail/set-grow-failed': [SKIP],
}], # not (arch == x64 and mode == release)
##############################################################################
['arch == riscv32', {
'wasm-trace-turbofan':[SKIP],
}], # (arch == riscv32)
##############################################################################
# 32-bit platforms
['arch in (ia32, arm, riscv32)', {
# Needs >4GB of available contiguous memory.
'wasm-trace-memory64': [SKIP],
'wasm-trace-memory64-liftoff': [SKIP],
}], # 'arch in (ia32, arm, riscv32)'
##############################################################################
# The output for Turbolev wrapper inlining tests can be different with these
# variants.
['variant in (stress_concurrent_inlining, stress_incremental_marking, stress_concurrent_allocation, stress_js_bg_compile_wasm_code_gc)', {
'js-wasm-wrapper-inlining-turbolev*': [SKIP],
}], # variant in (stress_concurrent_inlining, stress_incremental_marking, stress_concurrent_allocation, stress_js_bg_compile_wasm_code_gc)
##############################################################################
# Tests that require optimizing compilers.
['variant in (jitless, nooptimization)', {
'js-wasm-wrapper-inlining-turbolev*': [SKIP],
}], # variant in (jitless, nooptimization)
##############################################################################
# On 32 bit platforms we have int64 lowering.
['(arch != x64 and arch != arm64) or no_simd_hardware', {
'wasm-trace-deopt-64': [SKIP],
}],
['(arch != ia32 and arch != arm) or no_simd_hardware', {
'wasm-trace-deopt-32': [SKIP],
}],
##############################################################################
# There are two sources of output differences between 32 and 64 bit platforms:
# First, on 32 bit platforms we can't inline JS-to-Wasm wrappers with i64 args,
# and second, the wrapper inlining tests also enable Wasm-into-JS body inlining,
# which is not supported on 32 bit platforms.
['arch != x64 and arch != arm64', {
'js-wasm-wrapper-inlining-turbolev-64': [SKIP],
}],
['(arch != ia32 and arch != arm)', {
'js-wasm-wrapper-inlining-turbolev-32': [SKIP],
}],
##############################################################################
['verify_predictable', {
# https://crbug.com/v8/14397
'wasm-finish-compilation': [PASS, FAIL],
}], # 'verify_predictable'
##############################################################################
['dumpling', {
# Unexpected output.
'wasm-debug-trace-minimal': [FAIL],
}],
]