/**
 * @license
 * Copyright 2010 The Emscripten Authors
 * SPDX-License-Identifier: MIT
 */

// === Auto-generated postamble setup entry stuff ===

#if PTHREADS
#include "runtime_pthread.js"
#endif

#if LOAD_SOURCE_MAP
#include "source_map_support.js"
#endif

#if ASSERTIONS
var calledRun;
#endif

#if STANDALONE_WASM && MAIN_READS_PARAMS
var mainArgs = undefined;
#endif

#if HAS_MAIN
#if MAIN_READS_PARAMS
{{{ asyncIf(ASYNCIFY == 2) }}}function callMain(args = []) {
#else
{{{ asyncIf(ASYNCIFY == 2) }}}function callMain() {
#endif
#if ASSERTIONS
#if '$runDependencies' in addedLibraryItems
  assert(runDependencies == 0, 'cannot call main when async dependencies remain! (listen on Module["onRuntimeInitialized"])');
#endif
  assert(typeof onPreRuns === 'undefined' || onPreRuns.length == 0, 'cannot call main when preRun functions remain to be called');
#endif

  var entryFunction = {{{ getEntryFunction() }}};

#if PROXY_TO_PTHREAD
  // With PROXY_TO_PTHREAD make sure we keep the runtime alive until the
  // proxied main calls exit (see exitOnMainThread() for where Pop is called).
  {{{ runtimeKeepalivePush() }}}
#endif

#if MAIN_MODULE
  // Main modules can't tell if they have main() at compile time, since it may
  // arrive from a dynamic library.
  if (!entryFunction) return;
#endif

#if MAIN_READS_PARAMS && STANDALONE_WASM
  mainArgs = [thisProgram].concat(args)
#elif MAIN_READS_PARAMS
  args.unshift(thisProgram);

  var argc = args.length;
  var argv = stackAlloc((argc + 1) * {{{ POINTER_SIZE }}});
  var argv_ptr = argv;
  for (var arg of args) {
    {{{ makeSetValue('argv_ptr', 0, 'stringToUTF8OnStack(arg)', '*') }}};
    argv_ptr += {{{ POINTER_SIZE }}};
  }
  {{{ makeSetValue('argv_ptr', 0, 0, '*') }}};
#else
  var argc = 0;
  var argv = 0;
#endif // MAIN_READS_PARAMS

  try {
#if ABORT_ON_WASM_EXCEPTIONS
    // See abortWrapperDepth in preamble.js!
    abortWrapperDepth++;
#endif

#if STANDALONE_WASM
    entryFunction();
    // _start (in crt1.c) will call exit() if main return non-zero.  So we know
    // that if we get here main returned zero.
    var ret = 0;
#else
    var ret = entryFunction(argc, {{{ to64('argv') }}});
#endif // STANDALONE_WASM

#if ASYNCIFY == 2 && !PROXY_TO_PTHREAD
    // The current spec of JSPI returns a promise only if the function suspends
    // and a plain value otherwise. This will likely change:
    // https://github.com/WebAssembly/js-promise-integration/issues/11
    ret = await ret;
#endif // ASYNCIFY == 2 && !PROXY_TO_PTHREAD
    // if we're not running an evented main loop, it's time to exit
    exitJS(ret, /* implicit = */ true);
    return ret;
  } catch (e) {
    return handleException(e);
  }
#if ABORT_ON_WASM_EXCEPTIONS
  finally {
    // See abortWrapperDepth in preamble.js!
    abortWrapperDepth--;
  }
#endif
}
#endif // HAS_MAIN

#if STACK_OVERFLOW_CHECK
function stackCheckInit() {
  // This is normally called automatically during __wasm_call_ctors but need to
  // get these values before even running any of the ctors so we call it redundantly
  // here.
#if ASSERTIONS && PTHREADS
  // See $establishStackSpace for the equivalent code that runs on a thread
  assert(!ENVIRONMENT_IS_PTHREAD);
#endif
  _emscripten_stack_init();
  // TODO(sbc): Move writeStackCookie to native to to avoid this.
  writeStackCookie();
}
#endif

{{{ asyncIf(MODULARIZE || ASYNCIFY == 2 || expectToReceiveOnModule('setStatus') || '$runDependencies' in addedLibraryItems) }}}function run({{{ MAIN_READS_PARAMS ? 'args = programArgs' : '' }}}) {
#if ASSERTIONS
  assert(!calledRun);
  calledRun = true;
#endif

#if PTHREADS || WASM_WORKERS
  if ({{{ ENVIRONMENT_IS_WORKER_THREAD() }}}) {
    initRuntime();
    return;
  }
#endif

#if STACK_OVERFLOW_CHECK
  stackCheckInit();
#endif

  preRun();

#if '$runDependencies' in addedLibraryItems
  if (runDependencies) {
#if RUNTIME_DEBUG
    dbg('run: waiting on runDependencies');
#endif
    await resolveRunDependencies();
  }
#endif

#if expectToReceiveOnModule('setStatus')
  var setStatus = Module['setStatus'];
  if (setStatus) {
    setStatus('Running...');
    // Yield to the event loop to allow the browser to paint "Running..."
    await new Promise((resolve) => setTimeout(resolve, 1));
    // Then we want to clear the status text, but only after the rest of this function runs.
    setTimeout(setStatus, 1, '');
  }
#endif

  if (ABORT) return;

  initRuntime();

#if HAS_MAIN
  <<< ATMAINS >>>
#endif

#if expectToReceiveOnModule('onRuntimeInitialized')
  Module['onRuntimeInitialized']?.();
#if ASSERTIONS
  consumedModuleProp('onRuntimeInitialized');
#endif
#endif

#if HAS_MAIN
  var noInitialRun = {{{ makeModuleReceiveExpr('noInitialRun', !INVOKE_RUN) }}};
#if MAIN_READS_PARAMS
  if (!noInitialRun) {{{ awaitIf(ASYNCIFY == 2) }}}callMain(args);
#else
  if (!noInitialRun) {{{ awaitIf(ASYNCIFY == 2) }}}callMain();
#endif
#elif ASSERTIONS
  assert(!Module['_main'], 'compiled without a main, but one is present. if you added it from JS, use Module["onRuntimeInitialized"]');
#endif // HAS_MAIN

  postRun();
}

#if ASSERTIONS
#if EXIT_RUNTIME == 0
function checkUnflushedContent() {
  // Compiler settings do not allow exiting the runtime, so flushing
  // the streams is not possible. but in ASSERTIONS mode we check
  // if there was something to flush, and if so tell the user they
  // should request that the runtime be exitable.
  // Normally we would not even include flush() at all, but in ASSERTIONS
  // builds we do so just for this check, and here we see if there is any
  // content to flush, that is, we check if there would have been
  // something a non-ASSERTIONS build would have not seen.
  // How we flush the streams depends on whether we are in SYSCALLS_REQUIRE_FILESYSTEM=0
  // mode (which has its own special function for this; otherwise, all
  // the code is inside libc)
  var oldOut = out;
  var oldErr = err;
  var has = false;
  out = err = (x) => {
    has = true;
  }
  try { // it doesn't matter if it fails
#if SYSCALLS_REQUIRE_FILESYSTEM == 0 && '$flush_NO_FILESYSTEM' in addedLibraryItems
    flush_NO_FILESYSTEM();
#elif WASMFS && hasExportedSymbol('wasmfs_flush')
    // In WasmFS we must also flush the WasmFS internal buffers, for this check
    // to work.
    _wasmfs_flush();
#elif hasExportedSymbol('fflush')
    _fflush(0);
#endif
#if '$TTY' in addedLibraryItems
    // also flush in the JS FS layer
    for (var tty of Object.values(TTY.ttys)) {
      if (tty.output.length) {
        has = true;
      }
    }
#endif
  } catch(e) {}
  out = oldOut;
  err = oldErr;
  if (has) {
    warnOnce('stdio streams had content in them that was not flushed. you should set EXIT_RUNTIME to 1 (see the Emscripten FAQ), or make sure to emit a newline when you printf etc.');
#if FILESYSTEM == 0 || SYSCALLS_REQUIRE_FILESYSTEM == 0
    warnOnce('(this may also be due to not including full filesystem support - try building with -sFORCE_FILESYSTEM)');
#endif
  }
}
#endif // EXIT_RUNTIME
#endif // ASSERTIONS

var wasmExports;
#if SPLIT_MODULE
var wasmRawExports;
#endif

#if MODULARIZE == 'instance'
#if EMBIND_AOT
// The embind exports are declared here so that their post-ctor registration
// precedes any self-initialization below.  See phase_embind_aot in link.py.
<<< EMBIND_AOT_EXPORTS >>>
#endif
// In MODULARIZE=instance mode we delay most of the initialization work until
// the `init` function is called.
#if ASSERTIONS
var initCalled = false;
#endif
#if AUTO_INIT && !WASM_ESM_INTEGRATION
// In AUTO_INIT mode `init` is not exported; we self-initialize below.
async function init() {
#else
export default async function init(moduleArg = {}) {
#endif
#if ASSERTIONS
  assert(!initCalled);
  initCalled = true;
#endif
#if !AUTO_INIT || WASM_ESM_INTEGRATION
  Object.assign(Module, moduleArg);
#endif
  processModuleArgs();
#if WASM_ESM_INTEGRATION
#if PTHREADS
  registerTLSInit(__emscripten_tls_init);
#endif
#if !IMPORTED_MEMORY
  updateMemoryViews();
#endif
#if DYNCALLS && '$dynCalls' in addedLibraryItems
  assignDynCalls();
#endif
#else
  wasmExports = await createWasm();
#endif
  await run();
}

#if AUTO_INIT && !WASM_ESM_INTEGRATION
#if PTHREADS || WASM_WORKERS
// Worker threads self-init on demand from the CMD_LOAD handler (see
// runtime_pthread.js), so only the main thread inits here.
if ({{{ ENVIRONMENT_IS_MAIN_THREAD() }}})
#endif
await init();

#else

#if ENVIRONMENT_MAY_BE_NODE
// When run as the main script under node we run `init` immediately.
if (ENVIRONMENT_IS_NODE
#if PTHREADS || WASM_WORKERS
&& !{{{ ENVIRONMENT_IS_WORKER_THREAD() }}}
#endif
)
{
  const url = await import('node:url');
  const isMainModule = url.pathToFileURL(process.argv[1]).href === import.meta.url;
  if (isMainModule) await init();
}
#endif

#if ENVIRONMENT_MAY_BE_SHELL
if (ENVIRONMENT_IS_SHELL) {
  // When run in a shell we run `init` immediately.
  await init();
}
#endif

#endif

#else // MODULARIZE == instance

#if WASM_WORKERS || PTHREADS
if ({{{ ENVIRONMENT_IS_MAIN_THREAD() }}}) {
// Call createWasm on startup if we are the main thread.
// Worker threads call this once they receive the module via postMessage
#endif

#if !MODULARIZE && WASM_ASYNC_COMPILATION
// With async instantation wasmExports is assigned asynchronously when the
// instance is received.
createWasm().then(() => run());
#else
// In modularize mode the generated code is within a factory function so we
// can use await here (since it's not top-level-await).
wasmExports = {{{ awaitIf(MODULARIZE && WASM_ASYNC_COMPILATION) }}}createWasm();
{{{ awaitIf(MODULARIZE) }}}run();
#endif

#if WASM_WORKERS || PTHREADS
}
#endif

#endif // MODULARIZE != instance